Description
#ANDYSMANCLUB Stickers for the inside of a window on a car or any window.
How to Peel and Stick the Stickers
- Clean the surface – Make sure the area where the sticker will be applied is clean, dry and free from dust, grease or moisture.
- Prepare the sticker – Place the sticker on a flat surface and gently rub over the lettering with your fingers or a flat card to make sure the design is firmly attached to the transfer film.
- Peel off the backing – Slowly peel the backing paper away from the sticker, starting from one corner. Make sure the lettering remains attached to the clear transfer film.
- Position the sticker – Carefully place the sticker onto the desired surface. Take your time to ensure it is straight and correctly positioned before pressing it down.
- Apply the sticker – Press firmly over the entire sticker, working from the centre towards the edges to remove any air bubbles and ensure good adhesion.
- Remove the transfer film – Slowly peel the clear transfer film away at a low angle. If any part of the lettering starts to lift, gently press it back down and continue peeling slowly.
- Finish – Once the transfer film has been removed, gently press over the lettering one final time to ensure all areas are securely stuck.




Reviews
There are no reviews yet.